0.18 μm CMOS工艺的GPS/BDS双模可重构接收机射频前端

采用低中频架构设计了一种0.18μm CMOS工艺的GPS/BDS双模可重构接收机射频前端,能在GPS L1模式或BDS B1模式下工作。通过频率自适应电路调整中频滤波器的时间常数,降低其频率不确定度;压控振荡器中加入4位开关电容阵列,以提高频率调谐范围和相位噪声性能;通过硬件复用的方式降低系统功耗。测试结果表明,在1.8 V电源电压下,功耗37.8 m W,电压增益为103 d B,GPS L1和BDS B1波段噪声系数均小于3.2 d B。     

冲压增程弹进气道设计方法与性能分析

以冲压增程弹为应用背景进行了进气道设计.结合增程弹的特点,讨论了轴对称进气道中心锥参数、喉道参数、外罩参数的选择.特别对进气道唇口处参数、扩张段角度设计方法进行了分析.设计了单锥混压式、单锥外压式以及双锥混压式三种进气道,并进行了数值模拟.分析了进气道主要设计参数对其性能的影响.数值结果表明,就增程弹的性能要求而言,双锥混压式进气道的性能较高.     

弹丸速度的数字化激光幕测试技术

针对传统弹丸速度测量方法的局限，提出一种新的弹丸速度测试技术——数字化激光幕结合互相关速度测量算法的测试技术，并给出了激光总体测速方案、测速原理以及互相关测速方法，经靶场试验验证测试效果良好。     

基于实射数据的舰炮弹药当量系数

弹药当量系数是准确评估身管寿命的关键参数。通过对某型小口径舰炮的研究,提出了一种基于实弹射击数据的当量系数计算方法。对实弹射击试验获取的身管内膛烧蚀磨损数据进行了分析处理,拟合得到了身管磨损速度曲线,并计算得到了3种射击条件下的当量系数。研究结果为评估该类型火炮身管寿命提供了重要的数据支撑。     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

基于鱼雷航程实时预报的潜射线导鱼雷可攻性判断

针对新型潜射线导鱼雷可攻性判断的决策需求,在分析传统的鱼雷可攻性判断方法不足的基础上,提出以鱼雷航程实时预报作为线导鱼雷可攻性判断的决策依据.并对线导方位导引法进行了深入分析,给出了概略目标运动要素情况下鱼雷航程实时预报的解析模型,该模型可实时预报线导鱼雷航程和鱼雷线导段航行时间.经大量仿真计算验证.解析模型预报结果作为鱼雷可攻性判断依据是具有合理性的,该方法能较好地满足线导鱼雷攻击决策的需求.     

一种时频混叠的欠定混合通信信号盲分离算法

针对衰减-延迟欠定混合通信信号的盲分离问题,提出了一种基于子空间最小距离的源信号估计算法,通过计算观测信号到混合矩阵列矢量张成子空间的距离,估计任意时频点同时存在的源信号数目以及当前源信号对应的混合矩阵列矢量,把欠定混合问题转化为超定问题,然后通过计算Moore-Penrose逆矩阵求解源信号,理论分析和仿真结果验证了算法的有效性。     

LFM脉冲雷达距离维快速搜索处理算法

针对脉冲雷达近距离目标遮挡问题,从理论上分析了雷达最小作用距离不受限于脉冲宽度.在此基础上,以Chirp脉冲为例,提出了一种适合远近距离全程目标的快速搜索处理算法.该算法只需发射一种宽脉冲波形,而不必根据距离的变化改变脉宽,从而有效缩短了搜索时间,大大提高了搜索效率.仿真结果表明了理论分析的正确性和算法的有效性.     

基于DSP+FPGA的导航计算机数据采集与处理硬件设计

根据捷联惯导系统中数据采集和运算处理的要求,提出了以高性能DSP为核心,由FPGA构成主要外部输入输出接口的导航计算机硬件设计方案;设计了I/F转换电路;给出了各电路的硬件结构框图和各器件的特性、选择与应用。从硬件方面分别讲述了FPGA和DSP的工作过程和功能。利用本方案,对实现军事和工程领域中导航系统微小型化、降低系统成本和体积具有重要意义。     

反空空导弹的导引头研究

从反空空导弹的导引头对空空导弹的最大探测距离方面论述了其不适宜采用雷达导引头的原因,并指出了反空空导弹可采用红外导引头来跟踪空空导弹的可能性。同时又分析了空空导弹的红外辐射特性,说明了反空空导弹红外导引头探测器响应工作波段应为3μm～5μm。